 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| SIZE dH7 mm | NOMINAL TORQUE¹ Tn Nm | OVERRUNNING SPEED² | Dn6 mm | D2mm | D4 mm | Lmm | L1mm | Bmm | f mm | FACE | GROOVE | WEIGHT kg | |
| max INNERRACE RPM | max OUTERRACE RPM | b mm | t mm | ||||||||||
25 30 35 |
124 230 290 |
1400 1300 1100 |
3400 3000 2800 |
80 90 100 |
40 45 50 |
68 75 80 |
37 44 48 |
60 68 74 |
42.1 49.1 54.1 |
1 1 1 |
9 12 13 |
4 5 6 |
1.5 2.2 3.0 |
40 45 50 |
490 670 1100 |
950 900 850 |
2500 2400 2000 |
110 120 130 |
55 60 70 |
90 95 110 |
56 56 63 |
86 86 92 |
62.1 62.1 69.1 |
1.5 1.5 1.5 |
15 16 17 |
7 7 8 |
4.4 4.5 6.8 |
55 60 70 |
1250 1800 2650 |
720 680 580 |
1960 1800 1600 |
140 150 170 |
75 80 90 |
115 125 140 |
67 78 95 |
104 114 134 |
73.1 84 103 |
2 2 2.5 |
18 18 17 |
9 9 9 |
8.0 10.0 12.0 |
80 90 100 |
4000 7500 9500 |
480 380 350 |
1400 1250 1100 |
190 215 260 |
105 120 140 |
160 180 210 |
100 115 120 |
144 158 182 |
108 125 131 |
2.5 3 3 |
20 24 28 |
9 11 13 |
16 26 38 |
120 150 200 |
13900 27000 70000 |
250 180 120 |
950 750 550 |
300 370 480 |
160 200 260 |
240 310 400 |
140 180 240 |
202 246 326 |
152 196 265 |
3 4 5 |
32 32 40 |
18 18 25 |
56 120 274 |
| 250 | 136000 | 100 | 450 | 580 | 320 | 480 | 300 | 396 | 330 | 5 | 45 | 30 | 488 |
KEYWAYS:TO DIN 6885 PAGE 1 1)T MAX IS 2.5 x NOMINAL TORQUE (Tn)FOR SHORT PERIODS ONLY. 2)THE INDICATED MAXIMUM OVERRUNNING (IDLING) SPEED ARE VALID FOR PRESSURE LUBRICATION ONLY.FOR OIL BATH LUBRICATION 65% OF INDICATED SPEEDS. IF HIGHER SPEEDS ARE REQUIRED OTHER THAN THOSE LISTED PLEASE CONSULT
|
|
| wiperdrive© copyright. 2002 |